> Smith C E Smith Flush Mount Rod Holder 0 Degree 10 1 2 Deep

FLUSH MOUNTStainless Steel Rod HoldersWith 1/2" Threaded DrainThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in placeANGLE: 0LENGTH:10-1/2"I.D .:1-7/8"

FLUSH MOUNTStainless Steel Rod HoldersWith 1/2" Threaded DrainThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in placeANGLE: 0LENGTH:9"I.D.:1-5 /8"

FLUSH MOUNTStainless Steel Rod HoldersWith 1/2" Threaded DrainThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in placeANGLE: 30LENGTH:10-1/2"I. D.:1-7/8"

FLUSH MOUNTStainless Steel Rod HoldersWith 1/2" Threaded DrainThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in placeANGLE: 15LENGTH:10-1/2"I. D.:1-7/8"

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".ANGLE:0LENG TH:9"I.D.:1-5/8"

FLUSH MOUNTStainless Steel Rod HoldersWith 1/2" Threaded DrainThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in placeANGLE: 15LENGTH:9"I.D.:1- 5/8"

FLUSH MOUNTStainless Steel Rod HoldersWith 1/2" Threaded DrainThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in placeANGLE: 30LENGTH:9"I.D.:1- 5/8"

C.E. Smith Flush Mount Rod Holder, 30176 10.5quot DeepFLUSH MOUNTStainless Steel Rod HoldersWith 12 Threaded DrainThese larger 80C series models feature a beautifully rounded cast bottom end with a 12 tapered pipe threaded drain. Use them wh...

C.E. Smith Flush Mount Rod Holder, 15176 10.5quot DeepFLUSH MOUNTStainless Steel Rod HoldersWith 12 Threaded DrainThese larger 80C series models feature a beautifully rounded cast bottom end with a 12 tapered pipe threaded drain. Use them wh...

C.E. Smith Stainless Steel, Flush Mount Rod Holder, 0176Stainless SteelFlush MountSwivel Rod HOlders80 Series0deg1012 Length178 IDSwivel base ideal for bent butt rod fishingSwivels to follow the fish without removing the rod from the rod h...

Made of 100% 316 stainless steel, featuring an extra large, low profile cap and a super tough stainless steel gimbal bar welded in place designed to take the punishment of downriggers or heavy tackle. White Vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. Highly polished Silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.

C.E. Smith Stainless Steel, Flush Mount Rod Holder, 15176Stainless SteelFlush MountSwivel Rod HOlders80 Series15deg1012 Length178 IDSwivel base ideal for bent butt rod fishingSwivels to follow the fish without removing the rod from the rod...

C.E. Smith Stainless Steel, Flush Mount Rod Holder, 30176Stainless SteelFlush MountSwivel Rod HOlders80 Series30deg1012 Length178 IDSwivel base ideal for bent butt rod fishingSwivels to follow the fish without removing the rod from the rod...

Made of 100% 316 stainless steel, featuring an extra large, low profile cap and a super tough stainless steel gimbal bar welded in place designed to take the punishment of downriggers or heavy tackle. White Vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. Highly polished Silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.

Made of 100% 316 stainless steel, featuring an extra large, low profile cap and a super tough stainless steel gimbal bar welded in place designed to take the punishment of downriggers or heavy tackle. White Vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. Highly polished Silver finish, with a heavy-duty 100% welded tube-to-cap joint which will not break out.

2-WAY CLAMPStainless Steel Rod HoldersFINISH: SilverMOUNTMidFIT S STAINLESS TUBE SIZE*1-1/4" actual OD tube using included sleeve 53660S2)FITS ALUMINUM PIPE SIZE**1" schedule 40 pipeInvestment- cast 316 stainless steelUnique clamping system will rotate for either horizontal or vertical mountingStrong integrally-cast gimbal barSized to fit stainless tube or aluminum pipeStrong investment-cast 316 stainless steel rod holders with a sleek, swept-back look offer maximum corrosion resistance for long life. They feature a patented clamp system, which allows each rod holder to serve as a vertical or horizontal unit. The clamp cap comes attached horizontally. Unscrew the cap, turn 90 and the rod holder becomes a vertical clamp.*Stainless marine products are made from decorative stainless tube which is measured by its actual outside diameter and is sold in even sizes, 7/8", 1", 1-1/4", 1-1/2"**Aluminum marine products are made from schedule 40 aluminum pipe which has no measured dimension equal to the stated size. In fact: 3/4" schedule 40 pipe - 1.0625" OD; 1" schedule 40 pipe = 1.321" OD; 1-1/4" schedule 40 pipe =1.66" O.D.

2-WAY CLAMPStainless Steel Rod HoldersFINISH: GoldMOUNTTopFITS STAINLESS TUBE SIZE*1" actual OD tube (or 7/8" actual OD tube using included sleeve 53600S)FITS ALUMINUM PIPE SIZE**3/4" schedule 40 pipeInvestment- cast 316 stainless steelUnique clamping system will rotate for either horizontal or vertical mountingStrong integrally-cast gimbal barSized to fit stainless tube or aluminum pipeStrong investment-cast 316 stainless steel rod holders with a sleek, swept-back look offer maximum corrosion resistance for long life. They feature a patented clamp system, which allows each rod holder to serve as a vertical or horizontal unit. The clamp cap comes attached horizontally. Unscrew the cap, turn 90 and the rod holder becomes a vertical clamp.*Stainless marine products are made from decorative stainless tube which is measured by its actual outside diameter and is sold in even sizes, 7/8", 1", 1-1/4", 1-1/2"**Aluminum marine products are made from schedule 40 aluminum pipe which has no measured dimension equal to the stated size. In fact: 3/4" schedule 40 pipe - 1.0625" OD; 1" schedule 40 pipe = 1.321" OD; 1-1/4" schedule 40 pipe =1.66" O.D.

2-WAY CLAMPStainless Steel Rod HoldersFINISH: GoldMOUNTMidFITS STAINLESS TUBE SIZE*1" actual OD tube (or 7/8" actual OD tube using included sleeve 53600S)FITS ALUMINUM PIPE SIZE**3/4" schedule 40 pipeInvestment- cast 316 stainless steelUnique clamping system will rotate for either horizontal or vertical mountingStrong integrally-cast gimbal barSized to fit stainless tube or aluminum pipeStrong investment-cast 316 stainless steel rod holders with a sleek, swept-back look offer maximum corrosion resistance for long life. They feature a patented clamp system, which allows each rod holder to serve as a vertical or horizontal unit. The clamp cap comes attached horizontally. Unscrew the cap, turn 90 and the rod holder becomes a vertical clamp.*Stainless marine products are made from decorative stainless tube which is measured by its actual outside diameter and is sold in even sizes, 7/8", 1", 1-1/4", 1-1/2"**Aluminum marine products are made from schedule 40 aluminum pipe which has no measured dimension equal to the stated size. In fact: 3/4" schedule 40 pipe - 1.0625" OD; 1" schedule 40 pipe = 1.321" OD; 1-1/4" schedule 40 pipe =1.66" O.D.

2-WAY CLAMPStainless Steel Rod HoldersFINISH: SilverMOUNTMidFIT S STAINLESS TUBE SIZE*1" actual OD tube (or 7/8" actual OD tube using included sleeve 53600S)FITS ALUMINUM PIPE SIZE**3/4" schedule 40 pipeInvestment- cast 316 stainless steelUnique clamping system will rotate for either horizontal or vertical mountingStrong integrally-cast gimbal barSized to fit stainless tube or aluminum pipeStrong investment-cast 316 stainless steel rod holders with a sleek, swept-back look offer maximum corrosion resistance for long life. They feature a patented clamp system, which allows each rod holder to serve as a vertical or horizontal unit. The clamp cap comes attached horizontally. Unscrew the cap, turn 90 and the rod holder becomes a vertical clamp.*Stainless marine products are made from decorative stainless tube which is measured by its actual outside diameter and is sold in even sizes, 7/8", 1", 1-1/4", 1-1/2"**Aluminum marine products are made from schedule 40 aluminum pipe which has no measured dimension equal to the stated size. In fact: 3/4" schedule 40 pipe - 1.0625" OD; 1" schedule 40 pipe = 1.321" OD; 1-1/4" schedule 40 pipe =1.66" O.D.