> grundfos up 15 29 su

Grundfos UP15-29SF 1/12 HP Stainless Steel Circulator PumpGrundfos UP15-29SF 1/12 HP Stainless Steel Circulator Pump Features:; Quick connect terminals for easy installation; Removable check valve eliminates the need for an in-line flow check; Stainless steel your answer for corrosive and oxygen bearing fluids; Patented electronic starting unit provides the highest starting torqueof any circulators in its class; Ceramic bearings ensures years of quiet, trouble-free operation; Internal lip seal and filter keeps debris out of rotor can; SF = Two Bolt Flange (GF15/26) Grundfos UP15-29SF 1/12 HP Stainless Steel Circulator Pump Specifications:; Flow range: 0-22 gpm; Head range: 0-10 feet; Motors: 2-pole, single-phase; Max. liquid temperature: 230 ;F (110 ;C) and 150 ;F for UP 15-29SU/TLC; Min. liquid temperature: 36 ;F (2 ;C); Max. system pressure: 145 psi; Open system; If the UP pump is equipped with a timer, the maximum liquid temperature is 150 ;F (66 ;C).

The Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump is a Comfort Series Instant Hot Water System. Includes timer and line cord. Grundfos Pumps is proud to bring the comfort and savings of hot water recirculation to the existing homes market with the Comfort Series Instant Hot Water System. The Comfort System includes a Grundfos UP15-10SU7/TLC circulator and the revolutionary Comfort Valve. The stainless steel circulator, complete with timer and 10-foot power cord, is installed directly to the hot water discharge on the water heater. The Comfort Valve is installed under the sink at the fixture furthest from the water heater, and the system uses the existing cold water line to return hot water to the water heater. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump:; Flow range: 0 - 6.5 U.S. GPM; Head range: 0 - 6 FEET; Motors: Single Phase, 115 Volts; Maximum fluid temperature: 150;F (66;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI; Connection: 3/4-inch M X 3/4-inch FNPT; TLC = Timer, Line CordCONSTRUCTION - Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-10SU7P/TLC Comfort Series 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP15-10SU7P/TLC Comfor

UP15-29SF Grundfos 1/25 HP Stainless Steel Circulator Pump (59896771) Features:Quick connect terminals-for easy installationRemov able check valve-no need for an in-line flow checkStainless steel-for corrosive and oxygen bearing fluidsPatentend electronic starting unit-highest starting in its classCeramic bearing-years of quiet, trouble-free operationSpecific ations:Flow range: 0-20.5 U.S. gpm Head range: 0-9.7 feet Motors: 2-pole, single-phase Max. liquid temperature: 230 °F (110 °C) and 150 °F for UP 15-29SU/TLC Min. liquid temperature: 36 °F (2 °C) Max. system pressure: 145 psi Open system Note: If the UP pump is equipped with a timer, the maximum liquid temperature is 150 °F (66 °C).

UP15-10SU7P/TLC Grundfos Comfort Series 1/25 HP Recirculator Pump (595916)The Comfort valve is installed at the furthest fixture from the hot-water tank. With a built-in timer, the pump allows hot water to circulate along the loop through the valve using the cold-water side as a return line. As the temperature rises to 100 °F, the valve closes directing hot water to the tap, resulting in a constant availability of hot water.Features:No return line required. Installs in less than one hour.No electricity needed under the sinkBuilt-in timer & line cord.Uses less energy than a 25-watt light bulb.Can save up to 16,000 gallons of water per year, per household. ANSI/NSF61 and IAPMO listedTechnical Specifications: Model Number: UP15-10SU7P/TLC Horse Power: 1/25Flow range: 0 - 3.4 U.S. GPMHead range: 0 - 3.5 Ft.Motor: Single Phase, 115 VoltsMaximum fluid temperature: 150°F (66°C)Minimum fluid temperature: 36°F (2°C)Maximum working pressure: 145 PSIConnection: Union connect to 3/4" M x 3/4" F NPT Free Ground Shipping

Why has hot water recirculation been virtually impossible for existing homes? Traditional hot water recirculation is difficult, if not practically impossible to install in existing homes --- especially homes with finished basements. Companies have responded with clunky under sink units that are cumbersome to install and difficult to find electrical power under bathroom sinks. New Strategy for Existing Homes Grundfos innovation has developed a solution specifically for the existing home market. The Grundfos Comfort System provides a unique and cost effective solution to your hot water recirculation problems! Features: No return line required. Installs in less than one hour. No electricity needed under the sink. Built-in timer & line cord. Uses less energy than a 25-watt light bulb. Can save up to 16,000 gallons of water per year, per household. ANSI/NSF61 and IAPMO listed Electrical Connection Pump is fitted with 10 foot cord and 115V plug. Timer 24 hr, 3 position, 15 minute intervals.

Why has hot water recirculation been virtually impossible for existing homes? Traditional hot water recirculation is difficult, if not practically impossible to install in existing homes --- especially homes with finished basements. Companies have responded with clunky under sink units that are cumbersome to install and difficult to find electrical power under bathroom sinks. New Strategy for Existing Homes Grundfos innovation has developed a solution specifically for the existing home market. The Grundfos Comfort System provides a unique and cost effective solution to your hot water recirculation problems! Features: No return line required. Installs in less than one hour. No electricity needed under the sink. Built-in timer & line cord. Uses less energy than a 25-watt light bulb. Can save up to 16,000 gallons of water per year, per household. ANSI/NSF61 and IAPMO listed Electrical Connection Pump is fitted with 10 foot cord and 115V plug. Timer 24 hr, 3 position, 15 minute intervals.

Why has hot water recirculation been virtually impossible for existing homes? Traditional hot water recirculation is difficult, if not practically impossible to install in existing homes --- especially homes with finished basements. Companies have responded with clunky under sink units that are cumbersome to install and difficult to find electrical power under bathroom sinks. New Strategy for Existing Homes Grundfos innovation has developed a solution specifically for the existing home market. The Grundfos Comfort System provides a unique and cost effective solution to your hot water recirculation problems! Features: No return line required. Installs in less than one hour. No electricity needed under the sink. Built-in timer & line cord. Uses less energy than a 25-watt light bulb. Can save up to 16,000 gallons of water per year, per household. ANSI/NSF61 and IAPMO listed Electrical Connection Pump is fitted with 10 foot cord and 115V plug. Timer 24 hr, 3 position, 15 minute intervals.

1/22 HP 115V Single Phase Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.Features:Ce ramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Stainless steel pump housing.The motor is a 1-phase motor.No additional motor protection is required.Liquid:Li quid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Stainless steel1.4301 DIN W.-Nr.304 AISIMaterial, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA ThreadedType of connection: S.S. UnionSize, pipe connection: 1 1/4" NPSMPressure stage, pipe connec.: 145 psiPort-to-port length: 5.87 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85): F

1/22 HP 115V Single Phase Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.Features:Ce ramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Stainless steel pump housing.The motor is a 1-phase motor.No additional motor protection is required.Liquid:Li quid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Stainless steel1.4301 DIN W.-Nr.304 AISIMaterial, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA ThreadedType of connection: S.S. UnionSize, pipe connection: 1 1/4" NPSMPressure stage, pipe connec.: 145 psiPort-to-port length: 5.87 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85): F

1/22 HP 115V Single Phase Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.Features:Ce ramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Stainless steel pump housing.The motor is a 1-phase motor.No additional motor protection is required.Liquid:Li quid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Stainless steel1.4301 DIN W.-Nr.304 AISIMaterial, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA ThreadedType of connection: S.S. UnionSize, pipe connection: 1 1/4" NPSMPressure stage, pipe connec.: 145 psiPort-to-port length: 5.87 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85): F

Grundfos Vertical Float Switch with 10' cord for the SU252 and SU332 Series Pumps (VFS-10)

The Grundfos UP15-42BUC7 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP15-42BUC7 1/25 HP Recirculator Pump:; Flow range: 0 - 16.5 U.S. GPM; Head range: 0 - 15 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 205;F (96;C); Maximum working pressure: 145 PSI ; Connection: Sweat - 3/4"; BUC = Bronze, Union Connection, Check ValveCONSTRUCTION - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP15-42BUC7 1/25 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.

The Grundfos UP15-42BUC5 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Flow range: 0 - 16.5 U.S. GPM; Head range: 0 - 15 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 205;F (96;C); Maximum working pressure: 145 PSI ; Connection: Sweat - 1/2"; BUC = Bronze, Union Connection, Check ValveCONSTRUCTION - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.

UP15-18B7 Grundfos 1/25 HP Recirculator Pump (59896121)The Grundfos UP15-18B7 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS: Flow range: 0 - 15 U.S. GPM Head range: 0 - 14 FEET Motors: 2 Pole, Single Phase, 115 Volt Maximum fluid temperature: 230°F (110°C) Minimum fluid temperature: 36°F (2°C) Maximum working pressure: 145 PSI Connection: Sweat - 3/4"

UP15-18B5 Grundfos 1/25 HP Recirculator Pump (59896114) DescriptionThe Grundfos UP15-18B5 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS: Flow range: 0 - 15 U.S. GPM Head range: 0 - 14 FEET Motors: 2 Pole, Single Phase, 115 Volt Maximum fluid temperature: 230°F (110°C) Minimum fluid temperature: 36°F (2°C) Maximum working pressure: 145 PSI Connection: Sweat - 1/2"

UP15-10B5 Grundfos 1/25 HP Recirculator Pump (59896213) Features Includes: Open SystemBronze1/2" Sweat End ConnectionCorrosi on-Resistant Wet Rotor design, Circulation pumpBuilt-in Motor Protection for long lifeWhisper- Quiet operation for sound sensitive InstallationsComp osite Impeller Eliminates and Prevents Corrosive effects of fresh WaterLow Energy Consumption Wide RangeEasy to Install (less than 1 hour) and Maintenance- FreeImproved Performance and EfficiencyPre- program usage times designed to Save PowerNo additional Wiring RequiredTechnical Specifications: Model Number: UP15-10B5Horse Power: 1/25 HPVoltage: 115VWattage: 25WAmperage: 0.22AHertz: 60HzFlow range: 0 - 9 U.S. GPMHead range: 0 - 6 Ft. Motors: 2 Pole, Single PhaseMaximum fluid Temperature: 220°F (104°C)Minimum fluid Temperature: 36°F (2°C)Maximum working Pressure: 145 PSICapacitor: 2mF/400VConnectio n Type and Size: 1/2" Sweat Free Ground Shipping