Car Speakers and Subwoofers + Pioneer

Introducing the Champion Series Subwoofer, which feature an all-new design and look. The subwoofer has a maximum power output of 1400 watts. For extraordinary performance, the cone is made of Pioneer's IMPP with Aramid Fiber, and a dual mass magnet assembly for higher magnetic force, and more power. The wire terminal is spring-loaded and can take up to 8-gauge wire. A sub's surround plays a key role in its overall performance. In order for bass response to be clear and tight, the surround has to respond evenly around its entire circumference without flexing or puckering, even at high volume levels. That's why Pioneer created a surround consisting of two layers of urethane, with a layer of interwoven fiber between them. It's strong, stable, and it reduces distortion. To accurately drive and control its voice coil, a speaker needs a magnet and a pole yoke, to create magnetic force. The bigger or denser the magnet, the greater the magnetic force. The greater the magnetic force, the greater the power and control that's exerted over the voice coil. To make this happen in a big way, Pioneer uses a Dual Mass Magnet assembly (weighing in at 83oz.) to significantly increase the magnetic force. So, you get bigger and more accurate music. And yes, they even included a magnet cover. Why do they use Spring- Compression Binding Posts, instead of standard speaker wire terminals? So your speaker wire never shakes loose due to vibration (either from the road or from your music). When you insert the wire, the connector keeps a constant pressure on it. And it won't let go. These binding posts will accept wire as large as 8-gauge. TS-W308D2 provides two voice coils, each either at dual 2 or dual 4 ohms. So you can use a low-impedance amp to produce much bigger, much more powerful bass. More options, more power - that's what DVC is all about.

The Pioneer TS-A4672R is a 3-way speaker that handles 150-Watts max and it's equipped with a Composite IMPP cone using interlaced Aramid Fiber that's super-strong, rigid and tough while remaining very lightweight. The perfect attributes for strong bass and exceptional power handling, the TS-A4672R has a 15/16 Light Weight Balanced Dome midrange with Magnetic Fluid. Its own Neodymium Magnet gives you high-performance reproduction with low distortion. The 3/8 Dome Tweeter delivers smooth, detailed highs. A custom-fit basket will fit both US and European vehicles, making installation easy.

Key Features:Cone material: injection-molded polypropylene (IMPP) composite for strength and durabilitySurroun d: urethane, dual layerMagnet type: strontium Voice coil: four-layer with aluminum bobbinDamper: Conex for linear bass responseBasket design: stamped with magnet coverGasket: moldedTerminals: spring compression Nominal power handling capability: 150 watts RMSMaximum music power handling capability: 800 watts Frequency response: 20 to 4000 Hz Sensitivity: 91 dB (1 watt at 1 meter)Impedance rating: 4 ohmsMounting depth: 5.75 inches Cut-out dimension: 10.9 inches Weight: 1.5 lbs.

Pioneer's component speaker packages- specialized woofers; a component tweeter; and an outboard crossover network- give you the system flexibility you're looking for. And because they're Pioneers; they also deliver very high sound quality. 5-1/4" Foamed IMPP (Injection Molded Polypropylene) Rigilite™ Curved Composite Cone for Higher Performance and Deeper Bass Butyl Rubber Surround for Smoother Response Large Diameter Aramid Fiber Damper for Linear Bass Response Glass-Imide Voice Coil Bobbin for High Power Handling Capabilities CCAW (Copper-Clad Aluminum Wire) Voice Coil Projected Pole Yoke for Extended Bass Response 7/8" Soft Dome Tweeter with Neodymium Magnet; CCAW Voice Coil and Magnetic Fluid for Crisp; Clear Highs Surface; Angle or Flush Swivel Mounting Capabilities Outboard Crossover Network Included with -18dB/Oct. HPF and -6dB/Oct. LPF filters and Tweeter Protection Circuit New Basket Provides Improved Fit for GM and Volkswagen Applications 150 Watts Max. Music Power (50 Watts Nominal) (with 80Hz; -12dB/Oct. HPF) 90 Watts (30 Watts) without Crossover Sensitivity (Efficiency): 90dB (1W/1m) Frequency Response: 40 - 32;000Hz 4 Ohm Rated Dimensions: 6-3/4" x 3-1/8" (Woofer); 1-1/4" x ¾" (Tweeter) Mounting Depth: 2-1/4" (Woofer)

Pioneer Premier 12 Champion Series Pro Subwoofer - TSW3002D4/ 3500 Watts Max Power Handling/ 1000 Watts RMS Handling/ Air Suspension System/ Double-Stack Magnet With Double-Stack Top Plate/ Wide-Roll 3-Layer Fiber Radial Surround/ Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone/ Cast Aluminum Basket/ 4-Layer Long Voice Coil

description: pioneer has created the ts-swx310 ready-to-play subwoofer enclosure pre-loaded with one 12-inch ts-sw301 subwoofer. the slim wedge-shaped box is built to the optimal specifications of the subwoofer and is perfect for applications behind the seats of many pick-up trucks suvs or other vehicles where space is at a premium. the enclosure is made of reinforced medium density fiberboard (mdf) wrapped in high-quality black carpet with an embroidered pioneer logo. air suspension system: in order to create a subwoofer that is three and a quarter inches deep pioneer had to develop revolutionary subwoofer technology. a traditional subwoofer uses the spider design to keep the voice coil of the speaker aligned while it moves. 3-layer interwoven radial surround: the ts-swx310 incorporates an innovative woven cloth reinforced radial urethane surround for improved power handling reduced distortion improved durability and louder more controlled bass. m-shaped surround: the m-shape surround also has a lower height and a lower fc or tuning frequency. angled push terminals: traditional subwoofer terminals are mounted horizontally or vertically. fin-shaped basket: traditional subwoofers push air downward. this creates a loading effect or area of pressure underneath the speaker which hampers performance and responsiveness.

more complex mobile entertainment systems have special speaker requirements. if your design calls for component speakers pioneer has high-quality tweeters and mid-range speakers to fit your needs. 120 watts max. music power (with network) 40 watts nominal power handling 3/4" styrene rubber coated polyester soft dome diaphragm flush mount capabilities with plastic mounting cup (included) improved 2-way surface mounting with new twist-type mounting plate and double-faced adhesive tape tweeter mounting -6db/oct. capacitor included for tweeter protection heat resistant voice coil with magnetic fluid poly-imide voice coil bobbin heat resistant round mesh grill 0.16oz. neodymium magnet 2-way crossover (ud-321) available frequency response: 2.5k-30khz (-15db) sensitivity (efficiency): 90db (0.5m/1w) 4 ohm rated

You'll be on your way to limitless listening pleasure, when you upgrade your vehicle with the Pioneer TS-A4672R Car Speaker. This premiere, 4" x 6" Pioneer car speaker features 150 Watts maximum power. The Pioneer TS-A4672R is constructed with a Composite IMPP cone using interlaced Aramid Fiber, which produces booming bass sound and superior power handling. All your favorite tunes will sound better than ever when they're pumping through this exciting Pioneer Car Speaker. Thanks to the custom-fit basket included with the Pioneer TS-A4672R, installation will be a breeze. For a guaranteed low price on the Pioneer TS-A4672R car speaker, shop P.C. Richard & Son, the Appliance, Electronics, and Computer Giant!

HIGHLIGHTS Dual-Layer IMX (Injection Molded Matrix) Aramid/Basalt Fiber Composite Cone: To create new D-Series speakers, Pioneer developed the industrys first basalt fiber made from natural rock interwoven with aramid fiber. Used in the surface layer, this Aramid/Basalt Fiber material is highly rigid and better absorbent, enhancing stability and maintaining integrity throughout a wide temperature range. Rear Chamber Tweeter Enclosure: D-Series speakers feature an exclusive rear chamber tweeter enclosure that we first used in our famed PRS speakers. It extends mid-range frequency for improved vocal imaging and staging. High-Quality Crossover: The built-in -12dB/Octave HPF and LPF crossover improves the transition from mid to high frequency, for a smoother mid-range to tweeter response. Audiophile-grade capacitors and inductors are used, and all components are encased in a clear acrylic cover for protection. Smooth Off-Axis Response Optimal Choice of Tweeter Diaphragm Shapes Wave Guides control sound dispersion to make sound stage wider in the car. Lower Crossover Frequency Large-Sized Tweeter Diaphragm (1-1/8" diameter) Rear Chamber Light Weight Soft-Dome Diaphragm High-Quality Passive Crossover Network (Woofer, LPF: -6 dB; Tweeter, HPF: -12 dB) Low Distortion Thick Woofer Basket Large-Sized Woofer Magnet Dual-Layer IMX (Injection Molded Matrix) Aramid/Basalt Fiber Composite Cone DETAILS Woofer Cone Material: Dual-Layer IMX Aramid/Basalt Fiber Composite Cone Surround: Butyl Rubber for Smoother Resp

Key Features:Cone material: injection-molded polypropylene (IMPP) composite for strength and durabilitySurroun d: urethane, dual layerMagnet type: strontium Voice coil: four-layer with aluminum bobbinDamper: Conex for linear bass responseBasket design: stamped with magnet coverGasket: moldedTerminals: spring compression Nominal power handling capability: 120 watts RMSMaximum music power handling capability: 600 watts Frequency response: 20 to 4500 Hz Sensitivity: 90dB (1 watt at 1 meter)Impedance rating: 4 ohmsMounting depth: 5-3/8 inches Cut-out dimension: 9.4 inches Weight: 1.5 lbs.Recommended enclosure size: .7 to 1.

Air Suspension System: In order to create a subwoofer that is three and a quarter inches deep, 3-Layer Interwoven Radial Surround: The TS-SWX310 incorporates an innovative woven cloth reinforced M-Shaped Surround: The M-shape surround also has a lower height, and a lower fc or tuning Angled Push Terminals: Traditional subwoofer terminals are mounted horizontally or vertically. Fin-Shaped Basket: Traditional subwoofers push air downward. This creates a loading effect or area

Air Suspension System: In order to create a subwoofer that is three and a quarter inches deep, 3-Layer Interwoven Radial Surround: The TS-SWX310 incorporates an innovative woven cloth reinforced M-Shaped Surround: The M-shape surround also has a lower height, and a lower fc or tuning Angled Push Terminals: Traditional subwoofer terminals are mounted horizontally or vertically. Fin-Shaped Basket: Traditional subwoofers push air downward. This creates a loading effect or area

HIGHLIGHTS Dual-Layer IMX (Injection Molded Matrix) Aramid/Basalt Fiber Composite Cone: To create new D-Series speakers, Pioneer developed the industrys first basalt fiber made from natural rock interwoven with aramid fiber. Used in the surface layer, this Aramid/Basalt Fiber material is highly rigid and better absorbent, enhancing stability and maintaining integrity throughout a wide temperature range. Rear Chamber Tweeter Enclosure: D-Series speakers feature an exclusive rear chamber tweeter enclosure that we first used in our famed PRS speakers. It extends mid-range frequency for improved vocal imaging and staging. High-Quality Crossover: The built-in -12dB/Octave HPF and LPF crossover improves the transition from mid to high frequency, for a smoother mid-range to tweeter response. Audiophile-grade capacitors and inductors are used, and all components are encased in a clear acrylic cover for protection. Smooth Off-Axis Response Optimal Choice of Tweeter Diaphragm Shapes Wave Guides control sound dispersion to make sound stage wider in the car. Lower Crossover Frequency Large-Sized Tweeter Diaphragm (1-1/8" diameter) Rear Chamber Light Weight Soft-Dome Diaphragm High-Quality Passive Crossover Network (Woofer, LPF: -6 dB; Tweeter, HPF: -12 dB) Low Distortion Thick Woofer Basket Large-Sized Woofer Magnet Dual-Layer IMX (Injection Molded Matrix) Aramid/Basalt Fiber Composite Cone DETAILS Woofer Cone Material: Dual-Layer IMX Aramid/Basalt Fiber Composite Cone Surround: Butyl Rubber for Smoother Response V

Get deep big bass from a small enclosure Easy to install in virtually any vehicle IMPP composite cone woofer Dual 3-layer fiber-woven radial surround 4-layer long-excursion voice coil

sealed truck-style enclosure designed for Pioneer 10" shallow-mount subwoofers 3/4" MDF (medium density fiberboard) with black carpet covering contrasting front panel with integrated grille gold-plated binding post connectors dimensions: 27-15/16"W x 12-9/16"H x 5-7/8"D1 x 4-3/16"D2

Upgrade your sound with these 6"x 8" speakers that can handle up to 240 watts of maximum power.General Specifications: Speaker design: 3-way coax Sensitivity: 90 dB Frequency response: 5 hz - 32 kHz Maximum power handling: 240 watts Nominal power handling: 40 watts Impedance: 4 ohm Crossover frequencies: 4.5 kHz Dimensions (w/o grill): 8 5.75" x 2.75" Cut out dimensions: 7.5" x 5.25" Mounting depth: 2.5" Woofer size: 6" x 8" Diaphragm material: IMPP composite cone (interlaced 3rd generation aramid fiber) Surround: rubber Magnet material: ferrite Voice coil bobbin: glass imide Voice coil: copper Damper: single mid-range Type: balanced dome Size: 1.25"Diaphragm material: tetron net Magnet material: neodymium wweeter Type: dome Size: .38" Diaphragm material

Dual-layer IMX aramid/basalt fiber composite cone Butyl rubber surround for smoother response Glass-imide voice coil bobbin OFC copper ring 1-1/8" soft dome tweeter with magnetic fluid and neodymium magnet

sealed truck-style enclosure designed for Pioneer 10" shallow-mount subwoofers 3/4" MDF (medium density fiberboard) with black carpet covering contrasting front panel with integrated grille gold-plated binding post connectors dimensions: 27-15/16"W x 12-9/16"H x 5-7/8"D1 x 4-3/16"D2

Speaker Grille Included Woofer Cone Material Composite IMPP Cone with Interlaced Aramid Fiber Surround Foamed Rubber Coated Cloth Voice Coil Bobbin Glass-Imide Mid-Range 1- 13/16Lightweight Balanced Dome with Magnet Fluid

component speaker system includes two 6-1/2"/6-3/4" woofers, 2 tweeters, two external crossovers, and two woofer grilles injection-molded carbon graphite polypropylene with Aramid woofers butyl rubber surrounds 7/8" Tetron soft dome tweeters 2-50 watts RMS power range (230 watts peak)

Get deep big bass from a small enclosure Easy to install in virtually any vehicle IMPP composite cone woofer Dual 3-layer fiber-woven radial surround 4-layer long-excursion voice coil

Factory speakers just not making the grade? Take a step up the speaker food chain and move yourself into the Pioneer TS-G671M. High quality sound without a high impact to your wallet. These are 6" x 9" 4-way speakers, which translates to better frequency filteration to optimize sound.

2-way 4x10 speakers (pair) # IMPP (Injection Molded Polypropylene) woofer paper cone tweeter sensitivity: 91 dB frequency response: 38-23,000 Hz recommended power range: 2-35 watts RMS 4 x 10 IMPP (Injection Molded Polypropylene) Composite Cone Woofer 1-5/8 Cone Tweeter Frequency Response - 38 Hz to 23,000Hz

6-1/2" 3-way car speakers (pair) also fits in 6-3/4" speaker openings injection-molded polypropylene woofer reinforced with basalt, graphite, and Aramid fibers -- rubber surround 3/8" PET dome tweeter 1-5/8" cone midrange

Pioneer knows that not all speaker cutouts are standard in size, so they created these dash mount speakers. Designed to fit perfectly in various Japanese, American, and European vehicles, they reproduce music exceptionally well. Features include: 3-1/2" carbon-graphite blended injection molded polypropylene composite cone woofer; high energy strontium magnet in the woofer; glass-imide voice coil bobbin; conex damper for improved bass response; 1" poly-ether imide dome tweeter; and an ultra-slim neodymium magnet in the tweeter. Specifications: 60 watts maximum music power; 88dB (1W/1m) sensitivity efficiency; 60Hz-28kHz frequency response; and 4 Ohm rated. 1-year parts and labor Limited Manufacturer's Warranty. Made in Japan.

2-way 4x10 speakers (pair) # IMPP (Injection Molded Polypropylene) woofer paper cone tweeter sensitivity: 91 dB frequency response: 38-23,000 Hz recommended power range: 2-35 watts RMS 4 x 10 IMPP (Injection Molded Polypropylene) Composite Cone Woofer 1-5/8 Cone Tweeter Frequency Response - 38 Hz to 23,000Hz

Woofer Cone Material Composite IMPP cone using interlaced KEVLAR(r) brand fiber Surround Butyl Rubber for Smoother Response Voice Coil Bobbin Glass Imide Damper Latex-treated Conex Midrange Speaker: Mid-Range 1-5/8" Foamed PPC (Pearl Poly-Carbon) Balanced Dome with Magnetic Fluid

4"x6"/4"x6"m 2-way speakers (pair) injection-molded polypropylene (IMPP) composite woofer cone with cloth surround 1-3/16" polyetherimide (PEI) dome tweeter power range: 2-20 watts RMS (130 watts peak power) frequency response: 49-26,000 Hz

Injection-Molded Polypropylene (IMPP) woofer with Aramid fiber and butyl rubber surround 1/2 PET dome tweeter and 3/8 PET dome super tweeter 1.5 lightweight diaphragm balanced-dome midrange Power range - 2-50 watts RMS (280 watts peak power) Frequency response - 30-33,000 Hz

3-way 5-1/4" speakers (pair) Aramid fiber-reinforced IMPP woofer with butyl rubber surround 1-1/4" laminated polyester fiber balanced dome midrange and 3/8" silver PET film dome tweeter frequency response: 35-31,000 Hz recommended power range: 2-35 watts RMS

Surround yourself in sound with these Pioneer 4" x 10" speakers. Mounted in the rear deck, they support existing front speakers and fill your vehicle with tight, powerful sound. Features include: 120 watts of maximum power; injection molded polypropylene composite cone woofer; 1-5/8" cone tweeter; and a vertical flex dust guard. Specifications: 38- 23,000Hz frequency response; 91dB (1W/1M) sensitivity efficiency; 8.8 oz. high energy strontium magnet; 4 ohm rated; heat-resistant round punched metal mesh grille; and a top and bottom installation method. 1-year parts and labor Limited Manufacturer's Warranty. Made in China.

3-way 5-1/4 speakers (pair) Aramid fiber-reinforced IMPP woofer with butyl rubber surround / Laminated polyester fiber balanced dome midrange / Tweeter

Pioneer Champion TS-W302R Component Subwoofer Woofer - 150W (RMS) / 800W (PMPO)

12" 4-ohm Subwoofer Injection-molded polypropylene composite cone with urethane surround Power range: 50-150 watts RMS (800 watts peak power) Sensitivity: 97 dB Mounting depth: 5-3/4"

12" 4-ohm Component Subwoofer injection-molded polypropylene composite cone with urethane surround,20-90 Hz frequency response,50-150 watts RMS power range

Pioneer Premier 6x9 2-Way Speakers - TSD902P/ 360 Watts Max Power Handling/ Dual-Layer IMX Aramid/Basalt Fiber Composite Cone/ Rear Chamber Tweeter Enclosure/ Conex Damper/ Full Depth Basket/ Wave Guides

 12" Subwoofer  600W Max, 120W Nominal  4_  Freq Resp: 20 Hz?4.5Khz  Sensitivity: 90 Db

Max. Music Power 3500 Watts Nominal Power 1000 Watts Frequency Response 20 Hz to 150 Hz Impedance 2-Ohm or 8-Ohms (4 OHM DVC)

10" SPL Subwoofer with 2500 Watts Max Power Dual 4 ohm, 4 Layer, Long Coil Nominal Power Handling 800 Watts Dimensions 283.1 mm x 192.6 mm

Pioneer Black Premier 12 Shallow-Mount Subwoofer - TSSW1201S4/ 1500 Watts Music Power/ 400 Watts Nominal Power Handling/ IMPP Composite Double Cone Woofer/ M-Shaped Surround/ Basalt Fiber Technology/ Air Suspension Control System/ Black Finish