Network Accessories + D link RangeBooster G WBR 2310

The D-Link ANT24-0700 Omni-Directional 7dBi Indoor Antenna extends coverage for an existing 802.11b/g wireless network. The omni-directional design of the ANT24-0700 offers dramatically increased wireless signal coverage in all directions. With 360° of better signal reception, this high-gain antenna will also improve data throughput at further distances. It connects to a variety of wireless PCI adapters, wireless routers and access points on the market today. Whether the wireless router or access point has a SMA or TNC connector, the ANT24-0700 comes with a RP-SMA to RP-TNC conversion adapter to accommodate either connector type.

Package Contents - Xtreme N 2.4GHz Antenna, wall mounting kit, quick installation guide The ANT24-0230 Xtreme N 2.4GHz Antenna is a versatile antenna that improves the performance of D-Link's Xtreme N Desktop Adapter (DWA-552) and Router (DIR-655). It can also be used with the Xtreme N router (DIR-655) for greater placement flexibility, allowing the router to be placed near a modem or switch while the antenna is situated in a more ideal location. Hide your desktop computer underneath your desk and maintain wireless performance by placing the ANT24-0230 on top of your desk or mounting onto a wall. Alternatively, you can hide your router in your closet or in an enclosed space and still achieve optimal coverage by using the flexible Xtreme N 2.4GHz Antenna.

The DWL-P200 Express EtherNetwork™ Power over Ethernet Adapter from D-Link® delivers both data and electrical power to Ethernet-enabled devices such as wireless access points or Internet cameras, from a single Cat5 Ethernet cable. Using the convenience of Power over Ethernet (PoE), this unit eliminates the need to place your device near a power outlet – giving you more freedom in placement and easy cable management. Featuring a compact design, this adapter is simple to install and requires no tools or software. Simply plug the base unit into a power outlet; then connect the terminal unit into your network device using a standard Ethernet cable. Once set up, the terminal device unit can output power to any compatible 5 V or 12 V Ethernet-enabled device. With the DWL-P200, power and data can be transmitted up to distances of 328 feet using Ethernet cabling with virtually no reduction in data throughput.

The DPS-200 from D-Link® is a 60 W redundant power supply unit. The modular design of the DPS Series of Redundant Power Supply Units (RPSU) enables companies to selectively deploy higher availability configurations precisely when and where they are needed most. When paired with a supported D-Link® switch, the DPS-200 provides uninterrupted fail-over, in the unlikely event of a mechanical power supply failure. The tandem of D-Link’s new Enterprise Gigabit switches and DPS Series of Modular Redundant Power Supplies (RPSU) enables today’s business networks with flexibility, performance, scalability, and availability. The system integration between D-Link’s Managed Layer 2 switches, Layer 3 switches, and RPSU system, provide customers with the fundamental building blocks to create scalable networks without having to sacrifice network performance and availability.

The DPS- 900 from D-Link® is an 8-slot standard rack-mount size chassis designed to accommodate up to 8 units of DPS-200 or DPS-500, or a combination of both. Using a DPS-900, you can deploy up to 8 redundant power supply units in a standard equipment rack to support a stack of 8 stackable D-Link® switches mounted in the same rack.

The D-Link® 500 W Redundant Power Supply is designed to deliver the power required to your D-Link DES-3828P and DXS-3227P switch. It ensures that all attached Power over Ethernet (PoE) devices will remain active in the case of a single inadvertent internal power supply failure. The failure of an internal power supply in a switch can cause network and device downtime, which translates into inefficiency. The DPS-600 provides a safety net against this problem by utilizing an integrated detection circuit to continuously monitor the switching device’s internal power supply. In the event of a power interruption or failure, the redundant power supply will immediately be triggered to supply power to the switch and any attached devices.

The D-Link ANT24-0700 Omni-Directional 7dBi Indoor Antenna connects to a variety of wireless routers and access points on the market today.

Deliver power up to 328' (100m) away; 802.3af compliant Plug-and-play installation; No tools or software installation requiredSupports 802.3af ensuring compatibility with other 802.3af PoE compliant injector units or midspan switchesAdjustabl e output power to 5V or 12V via the voltage selector located on the back of the terminal unitSimplifies a remote network device installation by allowing you to place the device in locations that are beyond the reach of standard electrical outletsUse with Ethernet-enabled devices where power outlets are not readily available and with any compatible PoE power sourceDimensions: 3.19" L x 2.05" W x 1.10" H; weight: 0.18lbs.

The DES-6506 is a 24-port RJ-21 to RJ-45 patch panel for the D-Link DES-6510 RJ-21/Telco 50 module. Both modules are designed for the D-Link 6500 Chassis. The DES-6510 module supports 2 RJ-21/Telco 50 connectors that provisions to (24) 10BASE-T/100BASE-T X. The DES-6510 is a 1U high patch panel that gives an easy and convenient way to provide instant RJ-45 connection. It supports two RJ-21 ports that maps to 24 RJ-45 ports. Simply connect the RJ-21 ports on the DES-6510 to the DES-6506 and the DES-6506's panel simply becomes a medium for passing traffic between the blade and the connected stations. All management features supported on the DES-6510 are still supported.

NOTE: This antenna is only compatible with modems and routers with a 1/4 inch external antenna port. 5 X Range Extender - Extends up to 5 times the original range of your WiFi access in open space. Plug and Play - No extra pigtails needed. Comes with 6 feet pigtail with Reverse Polarity SMA termination. Plug directly into your D-link DWL520, Linksys WMP11, WET11, Netgear MA311, or D-link APs (anything that uses Reverse Polarity SMA). Manufactured in ISO-9001 compliant facilities. Fully tested with HP RF network analyser Frequency: 2400-2483 MHz.....Gain: 7 dBi..... Impedance: 50 Ohm.....VSWR < 1.5 Average...... Maximum Input Power 50 W.....Antenna Length 9 inch Directionality Omni..... Polarization Vertical..... Weight: 1.8 oz.....Pigtail Length: 6 ft (72 in, 183 cm).....Pigtail Connector Reverse Polarity SMA.....No Extra Pigtails Needed!

D-LINK DCS-1130 myd-link enabled network/surveilla nce camera w/ built-in microphone (retail)

It works right out of the box. Simply connect the cables, plug in the camera, run the short installation wizard and setup is complete.

Both modules are designed for the D-Link 6500 Chassis. The DES-6510 module supports 2 RJ-21/Telco 50 connectors that provisions to (24) 10BASE-T/100BASE-T X.

The 7dBi High-Gain Omni-Directional is Antenna designed to provide 360° of enhanced wireless signal coverage.

The Omni-Directional 7dBi Indoor Antenna is designed to provide extended coverage for an existing 802.11b/g wireless network.

This Adapter provides both data and power to Ethernet enabled devices using a single Ethernet cable, eliminating the need to place those devices near outlets.

The Omni-Directional 7dBi Indoor Antenna is designed to provide extended coverage for an existing 802.11b/g wireless network.

D-Link's DPS-900 is designed to hold 8 Redundant Power Supply Units and is a convenient mounting solution for multiple RPSUs..

By providing immediate fail-over protection, this 60-watt Redundant Power Supply Unit provides today's business networks with unmatched flexibility, availability and performance.

Extend the coverage of a Wireless Local Area Network (WLAN). Available at The Home Depot.

Maximize outgoing signal strength and incoming receiving sensitivity

D-Link ANT 6DBI Indoor Detachable Ant

Get extended coverage for your existing 802. 11b/g wireless network. Avoid the cost and complexity of adding additional access points or repeaters. The ANT24-0700 lets you enjoy the benefits of wireless connectivity at greater distances throughout your home or small office. Increased wireless signal coverage over 360 deg. . With better signal reception in all directions, this high-gain antenna also improves data throughput at greater distances. Operates on . 4GHz - . 5GHz frequency range. Connects to a variety of wireless routers and access points. A conversion adapter allows the ANT24-0700 to accommodate either an SMA or TNC connection on your wireless router or access point. Magnetic base provides maximum flexibility in placement. The ANT24-0700 comes with a magnetic base that provides a strong hold onto any metal surface. Also includes a 59 extension cable and a mounting kit. Backed by the manufacturers 1-year limited warranty. Available in Technology > Networking > Wireless Networking > Wireless Adapters

D-LINK Xtreme N ANT24-0230 2.4ghz Indoor 3-Connector Antenna (Retail)

D-Link 296 Watt Redundant Power Supply - 296 WRedundant Power Supply

By using the DWL-P50, both data and electrical power can be delivered to a non-PoE Ethernet-enabled device from a single CAT5 Ethernet cable.